Kyocera KM-C830D manual Auto shut-off function, More about the auto shut-off function

Section 6 FUNCTIONS

24. Auto shut-off function

This function automatically turns the main switch OFF () if no operation has been performed on the copier for a certain period of time (15 to 240 minutes).

When you want to make copies again, turn the main switch back

ON ( ).

●More about the auto shut-off function

The auto shut-off function is a power-saving feature which automatically turns the main switch to the copier OFF () when a certain time elapses without any operation being performed.

Copiers are generally in a standby mode more than they are in actual operation, so power consumption in the standby mode occupies a large part of overall consumption. Having the copier turned OFF () automatically after a certain amount of time reduces unnecessary power consumption in the standby mode or at night if the copier happens to be left on accidentally. The result is a lower electricity bill.

*In order to change the amount of time that will elapse before the auto shut-off function engages, see “8 Auto shut-off time” on page 7-29. In order to disable the auto shut-off function, see “3 Auto shut-off ON/OFF” on page 7-28.

*If the optional Printer Kit is installed in your copier, the copier will enter the energy-saving preheat mode rather than being turned off completely whenever the auto shut-off function engages. In this state, when the copier detects data for a print job, it will automatically recover to a copy-ready state and print out of the corresponding information will begin.

*Inch specification copiers only:

If the optional Fax Kit is installed in your copier, the copier will enter the energy-saving preheat mode rather than being turned off completely whenever the auto shut-off function engages. In this state, when the copier receives an incoming fax, it will automatically recover to a copy-ready state and print out of the corresponding information will begin.

6-48