Kyocera KM-C830D manual Loading paper into a drawer

Section 3 PREPARATIONS

1. Loading paper

Copy paper can either be loaded into the drawer(s) or set on the multi-bypass tray.

(1) Note when adding paper

After taking new paper out of its packaging, be sure to fan through them a few times to separate the sheets before loading the paper into a drawer or setting it on the multi-bypass tray.

(2) Loading paper into a drawer

Up to 500 sheets of standard paper (75 g/m2 – 90 g/m2) or color paper can be loaded into the drawer that is included with your copier. Up to 250 sheets of paper can be loaded into each drawer of the optional Paper Feeder.

•Standard accessory drawer(s)

Standard copier (for 1-sided copies only): Two 500-sheet capacity drawers

Duplex copier (for 2-sided copies): One 500-sheet capacity drawer

•Acceptable sizes of paper

Inch specifications

500-sheet capacity drawers: 11" x 8 1/2", 8 1/2" x 14" and 11" x 17"

250-sheet capacity drawers: 8 1/2" x 11", 11" x 8 1/2", 8 1/2" x 14" and

11" x 17"

Metric specifications

500-sheet capacity drawers: A5R, B5R, A4, B4 and A3

250-sheet capacity drawers: A5R, B5R, A4R, A4, B4 and A3

*The 500-sheet capacity drawers will not accept 8 1/2" x 11" [A4R] size paper.

*Neither type of drawer will accept 5 1/2" x 8 1/2" or 8 1/2" x 5 1/2" size paper.

IMPORTANT!

•BE SURE to use paper that is specified for color copy use in order to make clear color copies.

•DO NOT use paper such as that designated for inkjet printers or any paper treated with special coating.

•Specify the type of paper that is loaded into each drawer (plain, recycled, etc.) under “% Type of paper” on page 7-31.

1	Pull the drawer out toward you as far as it will go.
	* DO NOT pull more than one drawer out at a time.

2 Open the paper feed unit (shown as 1 in the illustration).

1

NOTE

DO NOT touch the rollers (shown as 2 in the illustration).

2

3-1