Kyocera KM-C830D manual If your machine is a standard copier, go directly to step

Section 6 FUNCTIONS

5

6

7

8

Use the M cursor or the N cursor key to select

“x Presentation” [“x HAND-OUT”] and then press the Enter key.

Inch specifications

Metric specifications

Use the M cursor or the N cursor key to select whether you want to have the image copied onto the first backing sheets or not.

•If you DO want to have the image copied onto the backing sheets, select “x Copy” [“x COPIED”].

•If you do NOT want to have the image copied onto the backing sheets, select “z Blank”.

Inch specifications

Metric specifications

Press the Enter key.

Use the M cursor or the N cursor key to specify the type of originals being copied.

Select “z 1-sided” if you are using 1-sided originals and “x 2-sided” if you are using 2-sided originals.

Inch specifications

Metric specifications

	Press the Enter key.
9	• If your machine is a duplex copier, go to the next step.
	• If your machine is a standard copier, go directly to step 12.

10 Use the M cursor or the N cursor key to select the type of finished copies you want to make.

Select “z 1-sided” if you want to make 1-sided copies and “x 2-sided” if you want to make 2-sided copies.

Inch specifications

Metric specifications

	Press the Enter key.
11
	The message display will return to the “Ready to copy.”
	screen.
	Use the numeric keys on the keypad to enter the number of
12	copies that you want to make.
		Inch specifications	Metric specifications

NOTES

•Each transparency and backing sheet will be ejected first, followed by the set of standard copies.

•If the optional Document Finisher is installed in your copier, the transparencies and backing sheets will be ejected onto the non-sort tray on the Document Finisher and the standard copy sets will be ejected one by one onto its sort tray.

6-24