Section 9 TROUBLESHOOTING
3 | Open and then close the front cover. | 2 | Operate the paper conveyor release lever and pull the paper |
The misfeed message will disappear and copying will start | conveyor out towards you as far as it will go. | ||
| again. |
|
|
| * Be sure to hold both the left and right sides of the front |
|
|
| cover and close it securely. |
|
|
2Misfeed in the paper conveyor section
If “Paper misfeed. Open Front Cover.” is displayed and the misfeed location indicator shown in the illustration lights, a misfeed has occurred in the paper conveyor section. Perform the following procedure to remove the jammed paper.
1 Open the front cover.
WARNING
High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock.
CAUTION
The copier’s fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned.
3 | Push the green release lever (shown as 1 in the illustration) |
down to the right, and remove the jammed paper without |
tearing it.
*If the paper does happen to tear, remove any loose scraps from inside the copier.
1 |
