Section 9 TROUBLESHOOTING

9-9

IMPORTANT!
The drum (shown as 3 in the illustration) is extremely sensitive to
dirt. Do not to touch the drum with your hands.
6Replace the transfer unit in its original position in the copier.
7Push down on the release lock (shown as 4 in the
illustration) and replace the transfer unit release lever into its
original position in the copier.
3Turn the green transfer unit release lever to the left until it
reaches a vertical position.
4Grasp the transfer unit handle (shown as 1 in the
illustration) and pull the transfer unit out towards you as far
as it will go.
5Remove the jammed paper without tearing it. If the paper is
difficult to remove at all, turn the black paper feed dial
(shown as 2 in the illustration) towards you. The misfed
paper will be fed out to a location that makes it easier to
remove.
* If the paper does happen to tear, remove any loose scraps
from inside the copier.
1
2
3

4