Dialogic® SS7G21 and SS7G22 Signaling Servers Hardware Manual Issue 7
Chapter 2: Introduction
2.1Purpose
This manual addresses the hardware aspects of the Dialogic® SS7G21 and SS7G22 Signaling Servers (hereinafter sometimes referred to collectively as “the SS7G21 and SS7G22 products” and individually as "SS7G21" and "SS7G22," respectively). It includes the specification of the products, a functional description of the internal hardware modules, details of all the used interface connections (including pinouts) and provides installation instructions. The manual also describes maintenance procedures, allowing the user to make
This manual should be read in conjunction with the appropriate SS7G2x <Operating Mode> User Manual, which gives full details of operation, including the user interface and a full description of all configuration parameters and commands. Section 2.10, “Related Information” on page 13 lists the various user manuals.
2.2Products
The Signaling Servers covered by this manual include:
•
•
Dialogic® SS7G21 Dialogic® SS7G22
The physical appearance of the units is shown in Figure 1.
Figure 1. Dialogic® SS7G21 and SS7G22 Signaling Servers
The product variants use the same
•An
•
•
•
•
•
•
A Server Board (containing dual Intel Xeon processors) A Hard Disk Drive (HDD)
Up to three SS7 Signaling Boards Four 1 Gigabit/s Ethernet ports Cooling fans
The main difference between the SS7G21 and the SS7G22 is the type of Dialogic® SS7 Signaling Boards (hereinafter sometimes referred to as "SS7 Signaling Boards") used and hence the number of SS7 links supported. The SS7G21 supports up to 12 SS7 links and 12 linksets, while the SS7G22 supports up to 128 SS7 links and 32 linksets.
11