Diamondback 600 Tm manual O L D O W N

600tmOM 8/24/06 11:17 AM Page 23

Workout Programs (continued)

Pause, Reset, Restart, or Switch the program

See Console section for details..

C O O L D O W N

Getting Started

This treadmill is equipped with a 3-minute Cool Down at the end of each program. It appears as soon as a program ends. Cool Down is designed to reduce muscle stiffness and allow your heart rate to recover.

Note: Cool Down is skipped for the Quick Start program.

Beginning the Program

Cool Down is active as soon as a program ends. The dot matrix window will scroll “COOL DOWN” and then display final program profile. This sequence will repeat until Cool Down is finished.

During the Program

Data Display

•Once it is started, the data display window will continue accumulating and dis play the default workout data of “time, distance, calories & heart rate”. Press “SELECT” button to switch the data displays.

•The time will display “3:00” and start continuing down.

•Speed display will show default speed of 2.0 mph.

•Incline display will show default incline of 0%

Adjustment

•Speed = 2.0mph. Press Speed “UP/DOWN” key or numeric quick key to adjust the speed from 0,5 – 3.5mph only.

•Incline = 0%. Press Incline “UP/DOWN” key or numeric quick key to adjust the incline from 0 – 12%.

•“START” key could be pressed to re-start the previous program again.

•“STOP” key could be pressed to skip the cool down mode and active the Workout Summary immediately.

Ending the Program

•When 3-minute duration is up or STOP key is pressed, Cool Down will end and enter Workout Summary. See Workout summary for details.

Pause, Reset, Restart, or Switch the program

See Console section for details.

W O R K O U T S U M M A R Y

Getting Started

For your convenience, this treadmill incorporates a Workout Summary right after the completion of the Cool Down. It will display the total workout data for 3 minutes before the Console resets.

600 Tm Owner’s Manual 21