600tmOM 8/24/06 11:17 AM Page 11

Assembly Instructions

Step 5: Motor Cover Assembly

1.Place the Left motor cover onto the left side of frame.

2.Insert and tighten the self-tap M5 x 10mm screw into the center and top mounting hole using Phillips screwdriver.

3.Insert and tighten two M5 x16 on front and rear end of the cover using Phillips screwdriver.

4.Repeat procedure 1, 2 & 3 for Right motor cover.

Use open wrench to adjust the leveling pad here.

Step 6: Finish Up

1.Make sure the treadmill is leveled with the floor. Adjust it if necessary.

2.Plug your power cord in and turn ON the treadmill.

3.Make sure your safety key is in place.

600 Tm Owner’s Manual

9

 

 

Page 9
Image 9
Diamondback 600 Tm manual Motor Cover Assembly, Finish Up