DirecTV HDTV user manual Place Batteries In The Remote Control, Plug In And Turn On The System

Models: HDTV

1 98
Download 98 pages 23.95 Kb
Page 19
Image 19
STEP 3: PLACE BATTERIES IN THE REMOTE CONTROL

SETUP AND CONNECTIONS

STEP 3: PLACE BATTERIES IN THE REMOTE CONTROL

Follow these steps whenever you need to install or change the batteries in your TV’s remote control.

1.Remove the cover from the battery compartment.

2.Insert batteries into the battery compartment, matching the + and – end of each battery.

3.Replace the cover.

STEP 4: PLUG IN AND TURN ON THE SYSTEM

Plug one end of the power cord into the back of the television as shown on right. Plug the other end into a wall outlet. Be sure to insert the plugs completely.

To turn on the TV, press the TV or ON•OFF button on the remote control or the POWER button on the front panel. It may take several seconds for the TV to turn on.

STEP 5: COMPLETE THE INTERACTIVE SETUP

Interactive setup appears when you turn on your TV for the first time. Follow the steps to configure the basics of your system, such as setting up the time and day, searching for available channels, and setting up speakers. To run it again, select Assistance from the main menu, then select Interactive Setup. For more details, see the section “Getting Assistance” in this book.

STEP 6: ORDER PROGRAMMING

You should decide if you would like to receive DIRECTV® programming*. To receive DIRECTV programming, your satellite dish antenna must be installed and pointed correctly. You must also contact your service provider, DIRECTV.

Programming with DIRECTV:

Call 1-800-347-3288

*DIRECTV® programming is provided in accordance with the terms and conditions of the DIRECTV Customer Agreement, a copy of which is provided with your first DIRECTV billing statement. DIRECTV is a trademark of DIRECTV, Inc., a unit of Hughes Electronics Corp., and is used with permission.

TV

When you order programming, you need to know your access card number. To get the number, select Assistance from the main menu and then select System Test.

Wait for the system to run all of its tests. The access card number is displayed at the end of the system test.

Write the access card number in the space below for easy reference:

______________________________

16

Page 19
Image 19
DirecTV HDTV Place Batteries In The Remote Control, Plug In And Turn On The System, Complete The Interactive Setup