GETTING ASSISTANCE
RUNNING THE INTERACTIVE SETUP
You should have completed the interactive setup the first time you plugged in your TV. However, if you need to access the interactive setup again, you can access it through the Assistance menu.
1.Press MENU on the remote control to access the main menu.
2.Select Assistance from the main menu.
3.Select Interactive Setup and follow the
The interactive setup process allows you to complete all steps or selectively skip steps.
The steps involved in the interactive setup include:
•Setting the time and date
•Searching for channels
•Setting up speakers
•Selecting an audio processor
•Specifying your satellite dish antenna type
•Running the system test
Note that if you do not subscribe to DIRECTV® programming, you can select “Skip this step” for specifying satellite dish antenna type and running the system test.
GETTING ANTENNA INFORMATION
The Antenna Info menu helps you measure the strength of all available TV channels. It will help you adjust any terrestrial TV antennas. (The actual adding of channels is done by using the Channel Search menu.)
To access the Antenna Info menu:
1.Press MENU to bring up the main menu.
2.Select Assistance.
3.Then select Antenna Info.
A dialog box reports the status of the signal search and lists channels that are being received or have been received from all terrestrial antennas. To switch between antennas, highlight and channel and then press ANTENNA on the remote control.
76
