Chapter 12

Connecting to the Nearby TV (TV1)

CONNECTING TO THE NEARBY TV (TV1)

This section describes how to connect receiver TV1 output ports to a nearby TV. Select one of the following methods.

HDTV Digital Audio/Video Connections

The HDTV Digital Audio/Video connection provides high-quality audio and video to your HDTV or HD Monitor in one cable.

1Connect an HDTV Digital Audio/Video cable between the HDTV Digital Audio/Video connection on the receiver and HDTV set or monitor.

2Turn on your receiver and TV using the front panel buttons.

3Confirm that you are getting a picture from the receiver. Consult your HDTV user’s guide if you need to change your HDTV to display from the Digital Audio/Video input.

4If you do not see a picture, see No Picture on the nearby TV on page 99.

Note: In most cases connecting the Digital Audio/Video cable will provide plug-and-play control of the monitor’s display resolution and other settings. However, your HDTV may require selecting a different format to display from the receiver during setup.

5Turn up the volume on your HDTV and confirm you have sound. If you don’t have sound, your system may require you to connect audio (red and white) RCA-type cables between the receiver Audio Outputs and audio input connections.

98

Page 44
Image 44
Dish Network 622 manual Hdtv Digital Audio/Video Connections, Connecting to the Nearby TV TV1