Low Battery Warning
When you see a low battery warning message on your screen below the Program Banner, the batteries in your remote control are weak and need to be replaced.
Here's a helpful hint...Don’t wait until you see this warning to change the remote control batteries. If your remote control doesn’t seem to be working very well (for example, you have to press POWER more than once to turn the receiver on or off), it’s a good indication that the batteries are getting weak.
Attach the Remote Antenna
Attach the UHF remote antenna to the receiver's back panel Remote Antenna input so you can use your UHF Pro Remote Control 2. Without the UHF antenna, you cannot use the remote to control the receiver. See Adjusting the Remote Antenna on page 74 for more detailed information about improving the performance of your UHF Pro remote control.
17
Slide the cover back into place.
4
Take out all of the old batteries.
Press down on the top of the battery cover and slide the cover off.
1
2
3 Put the new batteries in. Make sure you match the plus (“+”) ends with the plus markings on the battery case.
Satellite Receiver
Remote Control
Remote Control Batteries
The remote control comes with AAA batteries. When you replace old batteries, you should replace all of the batteries. Use batteries of the same kind, for example, alkaline or carbon zinc. Don’t mix batteries of different kinds. Alkaline batteries last longer.
Page 67
Image 67
Dish Network 622 manual