Dolby Laboratories DP570 A.1.2 Selecting Analog Outputs, A.1.3 Choosing Bass Management Settings

62 Dolby® DP570 Multichannel Audio Tool User’s Manual
Configuring a Monitor System Assigning Monitor System Configuration Settings
Figure A-2 Monitor Setup Tab
A.1.2 Selecting Analog Outputs
ThesystemautomaticallydetectsthepresenceoftheCatNo.548AnalogOutputsCard,
andcheckstheAnalogOutputsboxwhenitispresent.Unchecktheboxifyoudonotwish
tousethem.Ifyouuncheckthebox,allthesettingsinthisareawillbegrayedoutand
unavailable.
A.1.3 Choosing Bass Management Settings
Ifyouhavea5.1‐channelmonitorsystemwithfull‐rangespeakersateverychannelanda
subwoofer,youmaynotneedtousebassmanagement,andcanleavethisfeatureatthe
factorydefault,None.Whennobassmanagementisselected,onlytheLFEchannelissent
tothesubwoofer.
Ifyouhaveanyotherspeakerconfigurationyoushouldchooseappropriatesettingsfor
BassManagement,SubwooferCrossover,andLFEMonitorMode.Usethecontrols
showninFigureA‐3.
Forexample:
•Ifyourmonitoringsystemconsistsoffivesatellitespeakersandasubwoofer,youcan
redirectthelowfrequenciesfromthefivemainchannelstotheSubwooferoutput.