Dolby Laboratories DP570 A.1.4 Choosing Back Surround Speakers, A.1.5 Emulator Reversion , A.1.6 Setting the Lt/Rt Gain, A.1.7 Configuring Dolby Pro Logic II

64 Dolby® DP570 Multichannel Audio Tool User’s Manual
Configuring a Monitor System Assigning Monitor System Configuration Settings
Figure A-3 Bass Management Settings
A.1.4 Choosing Back Surround Speakers
Thesettingrecordsthenumberofbacksurroundspeakersyouhaveinyourmonitoring
system.ThedefaultisNone.Ifthisnotcorrect,clickeither1or2.
A.1.5 Emulator Reversion
Thissettingisnotactiveinthecurrentversion.
A.1.6 Setting the Lt/Rt Gain
ThisisaninputtrimfortheseparateLt/Rt Input.Thedefaultvalueis0dB.Adjustitusing
thedialshowninFigureA‐4.
Figure A-4 Lt/Rt Gain Function
A.1.7 Configuring Dolby Pro Logic II
Foradiscussionofthesefeaturesandtheiruses,seeDolbyProLogicIISupportonpage 41.
TosetuptheDP570forDolby®ProLogicII:
1. SelectamodebypressingoneofthebuttonsshowninFigureA‐5.Thedefaultis 
Movie.
2. InMusicmode,usetheslidersshowninFigureA‐5toadjusttheCenterWidth val ue
andDimensionvalues.Thedefaultforbothis0.
Note:Movieistherecommendedmodeforprofessionalmonitoring.Thewiderangeof
possiblechoicesinMusicmodemakeittoocomplexandunpredictabletoemulate.