5. Press Mode selector button to exit.
4.4.7 Frequency
The setting of frequency will prevent the occurrence of flashing due to the local frequency rate. For detailed information, please contact your local energy provider.
1.Turn the camera on and ensure that it is in Setup mode.
2.Use the Up shift selector button to select option and use the Down shift selector button to select the frequency.
3.Press Set/ Function button to access the menu, press the Up/ Down shift selector button to select NTSC or PAL.
4.Press Set/ Function button to confirm.
5.Press Mode selector button to exit.
※According to the frequency of the current local fluorescent lamps, 50Hz or 60Hz is an appropriate selection.
4.4.8 Default
Use the default option to reset all settings to the factory default. To reset factory default settings:
1.Turn the camera on and ensure that it is in Setup mode.
2.Use the Up shift selector button to select option and use the Down shift selector button to select the factory settings.
43
