a trail by placing a trail point on the screen every time you change di- rections. (The methods used for creating a trail and the trail update rate can be adjusted or even turned off. See Sec. 8 for Trail Options.)
To preserve a trail from point A to point B, you must turn off the trail by making it inactive before heading to point C or even back to point A. When the current trail is set inactive, the unit automatically begins recording a new trail.
To Save a Trail
1.Press MENUMENU↓ to MY TRAILSENT.
Visible Active symbol symbol
Sequence for saving a trail and beginning a new one. My Trails com- mand (left). The Trails Menu (center). The arrow to the right of Trail 3 indicates the trail is active and the check to the left indicates the trail is visible on the map display. The Edit Trail menu (right) with the Name command selected.
2.Press ↓ to the Active Trail NameENT.
3.Press ↓ to ACTIVEENT. This unchecks the Active option.
4.To return to the previous page, press EXIT repeatedly. As you left the Edit Trail menu, you will notice that a new trail was started with a new sequential number. In the example figure below, the new trail is num- ber 15, showing zero points. Note that Trail 14 is inactive, but is still visible on the map.
109
