4.ARROW KEYS – These keys are used to navigate through the menus, make menu selections, move the map cursor and sonar chart cursor and enter data.
5.ENT – The Enter key allows you to save data, accept values or exe- cute menu commands. It is also used to create event marker icons.
6.EXIT – The Exit key lets you return to the previous screen, clear data or close a menu.
7.WPT – The Waypoint key is used to save and recall waypoints, search for waypoints and access the waypoint list. It's also involved in some navigation functions.
8.ZOUT (Zoom Out) – This key lets you zoom out the screen. On the Sonar Page, it will allow you to see the full sonar chart display, show- ing the entire water column from surface to bottom. On the Full Map display, this lets you see a larger geographic area on the display. Less detail is seen as you zoom out.
9.ZIN (Zoom In) – This key lets you zoom in the screen. On the Sonar Page, it enlarges fish signals and bottom detail. On the Full Map dis- play, zooming in lets you see greater detail in a smaller geographic area on the display.
Power/lights on and off
To turn on the unit, press PWR. When the unit is powered up, the Full Map GPS Page will be displayed. To switch between Sonar and Map page options, press PAGES← →. To select a page, press ↓ ↑ to the Page NameENT.
To turn on the backlight, press PWR again. The unit has four backlight levels to select from. Repeatedly pressing PWR will cycle through the backlight settings and turn off the backlight.
Turn off the unit by pressing and holding the PWR key for 3 seconds.
88
