Eagle Electronics 250i manual Mounting the Sonar Unit In-Dash or Bracket, Top

CAUTION:

Failure to use the enclosed 3-amp fuse will void your warranty! For a replacement, use a type 3AG 3-amp fuse.

This unit has reverse polarity protection. No damage will occur if the power wires are reversed. However, the unit will not work until the wires are attached correctly.

Mounting the Sonar Unit: In-Dash or Bracket

You can install the sonar unit on the top of a dash with the supplied bracket. It can also be installed in the dash with an optional FM-6 dash-mounting kit.

Top

ALWAYS VERIFY DIMENSIONS.

Cut along this line

In-dash mounting template for Cuda 250.

NOTE: This figure is not printed to scale.

33