5.Move the cursor to the next point in the route, a spot where you need to turn or change direction and press ENT to set the next waypoint.

6.Repeat step five until the route reaches your destination.

7.To save your route, press EXIT. The Cuda reverts to the Edit Route screen, with the route automatically named Route 1 and stored in the unit's internal memory.

You can edit the route and run other commands, but if you are finished with the route for now, return to the main page display by pressing EXIT repeatedly.

Delete a Route

1.From the NAVIGATION PAGE, press MENUENT or from the MAP PAGE press MENUMENU↓ to ROUTE PLANNINGENT.

2.Press ↓ to route nameENT.

3.Press → to DELETE ROUTEENT← to YESENT.

Tip:

You can also delete all routes at once:

1.From the NAVIGATION PAGE, press MENUENT or from the MAP PAGE press MENUMENU↓ to ROUTE PLANNINGENT.

2.Press → to DELETE ALLENT← to YESENT.

Edit a Route

To edit a route name:

1.From the NAVIGATION PAGE, press MENUENT or from the MAP PAGE press MENUMENU↓ to ROUTE PLANNINGENT.

2.Press ↓ to route nameENT→ to EDIT ROUTE NAMEENT.

3.Use ↑ ↓ to change the first character, then press → to move the cur- sor to the next character and repeat until the name is correct. Press ENT. Return to the main page display by pressing EXIT repeatedly.

122

Page 130
Image 130
Eagle Electronics 250i manual Delete a Route, Edit a Route