To access the Set Local Time menu, acquire your position, then press MENUMENU↓ to SYSTEM SETUPENT↓ to SET LOCAL TIMEENT.
To set Local Time: Press ENT. Press ↑ ↓ to change the first character, then press → to move the cursor to the next character. Repeat until the time is correct and press ENT.
To set the Day: Press → to DAYENT. Use ↑ ↓ to select the day and press ENT.
To set the Month: Press ↓ and ← to MONTHENT. Use ↑ ↓ to select the month and press ENT.
To set the Year: Press → to YEARENT. Press ↑ ↓ to select the year and press ENT.
To set Time Format: Press ↓ to TIME FORMATENT. Use ↑ ↓ to select the desired Time Format and press ENT.
To set Date Format: Press ↓ to DATE FORMATENT. Use ↑ ↓ to select the desired Date Format and press ENT.
In the center of the local time menu is CONFIG DST. It allows your unit to automatically make the adjustment for Daylight Savings. You may se- lect which set of rules matches DST in your region or accept the de- fault. Once you are satisfied with the time settings, press EXIT repeat- edly to get back to the main page display.
Show WAAS Alarm
When the signal is available, your unit will automatically use WAAS to boost the accuracy of a position fix. When the WAAS signal is lost or acquired, an alarm message appears. Since the U.S. government is still developing the WAAS system, it is not unusual for a GPS/WAAS re- ceiver to frequently lose and reacquire its lock on a WAAS satellite. That can result in the alarm going off repeatedly. If you want, you can turn off the WAAS Acquired/Lost alarm without affecting how the unit uses WAAS.
151
