sound until the bottom goes deeper than 10 feet. The deep alarm works just the opposite. It sounds a warning tone if the bottom depth goes deeper than the alarm's setting. Both depth alarms work only off the digital bottom depth signals. No other targets will trip these alarms. These alarms can be used at the same time or individually.
Sonar Alarms selected from main menu (left).
The Sonar Alarms menu (right).
To adjust and turn on the shallow alarm:
1.Press MENUMENU↓ to ALARMSENT.
2.Press ↓ to SONAR ALARMSENT.
3.Press ↑ or ↓ to SHALLOW ALARM ENABLED and press ENT.
4.Press ↑ to SHALLOW DEPTHENT.
5.Use ↑ ↓ to change the first digit, then press → to the next digit. Re- peat these steps until you have entered the desired depth and press
ENT.
To switch to a different depth setting, open the Sonar Alarms menu and repeat the instructions in steps 4 and 5 above.
To adjust and turn on the deep alarm:
1.Press MENUMENU↓ to ALARMSENT.
2.Press ↓ to SONAR ALARMSENT.
59
