9.At destination, Arrival Alarm goes off; to clear it, press EXIT. Cancel navigation: press MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.
10.Return to Wpt 1 by Backtrack Trail. Press MENUMENU↓ to MY
TRAILSENT. Press ↓ to Trail 1ENT↓ to NAVIGATEENT→ to REVERSE
ROUTEENT← to NAVIGATE ROUTEENT. (If arrival alarm sounds, press EXIT.) Follow navigation displays.
11.Back home, Arrival Alarm goes off; press EXIT. Cancel navigation: press MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.
12.To turn off the unit, press and hold PWR key for three seconds.
Find Your Current Position
Turn on the unit. It automatically searches for satellites and calculates its position in approximately one minute or less, under clear sky condi- tions.
NOTE:
Clear sky means open sky, unobstructed by terrain, dense foliage or structures. Clouds do not restrict GPS signal reception.
If for some reason satellite acquisition takes longer, you may be inside a structure or vehicle or in terrain that is blocking signal reception. To correct this, be sure you are positioned so the unit's antenna module has as clear a view of the sky as possible, then turn the unit off and back on again.
Moving Around the Map: Zoom & Cursor Arrow Keys
The map is presented from a bird's eye view perspective. The current zoom range shows in the lower left corner of the screen.
1.Press the ZIN key (zoom in) to move in closer and see greater detail in a smaller geographic area.
2.Press the ZOUT key (zoom out) to move farther away and see less map detail, but a larger geographic area.
100
