Eagle Electronics 250i manual From the Map, Sonar or Map with Sonar pages, press MENU↓ to

To correct this problem, track-up mode rotates the map as you turn. What you see on the left side of the screen should always be to your left, and so on.

Another option is course-up mode, which keeps the map at the same orientation as the initial bearing to the waypoint. When either track-up or course-up mode is on, an "N" shows on the map screen to help you see which direction is north.

To change map orientation from the Map Page, press MENU↓ to MAP ORIENTATIONENT. Use ↑ ↓ to select the desired mode, then press ENT. Press EXITEXIT to return to the main page display.

Map Orientation selected on Map Menu (left).

North Up option selected on Map Orientation menu (right).

Overlay Data

To change the digital data shown on the Map, Sonar or Map with Sonar pages, press PAGES, then use ↓ ↑ to select the Full Map, Sonar or Map with Sonar page and press EXIT.

To select data for display:

1. From the Map, Sonar or Map with Sonar pages, press MENU↓ to

OVERLAY DATAENT.

2.Use ↓ ↑ to select a Data Type, then press ← → to turn the data op- tion on (check) or off (unchecked).

145