3.Press ↓ to DEEP ALARM ENABLEDENT.
4.Press ↑ to DEEP DEPTH and press ENT.
5.Use ↑ ↓ to change the first digit, then press → to the next digit. Re-
peat these steps until the desired depth has been input. Press ENT.
To switch to a different depth setting, open the Sonar Alarms menu and repeat the instructions in steps 4 and 5 above.
Zone Alarm
The zone alarm is triggered when any echo passes inside the zone alarm bar, shown on the right side of the screen.
To adjust and turn on the zone alarm:
1.Press MENUMENU↓ to ALARMSENT↓ to SONAR ALARMSENT.
2.Press ↓ to ZONE ALARM ENABLEDENT↑ to ADJUST ZONE ALARMENT.
Sonar Alarms menu with Adjust Zone selected (left). Adjust Zone
Alarm selection box with Upper selected (right).
3.To set upper boundary for the Zone Alarm, use ← → to select UPPER, then press ↑ ↓ to move the top of the bar to the desired depth.
4.To set lower boundary for the Zone Alarm, use ← → to select LOWER, then press ↑ ↓ to move the bottom of the bar to the desired depth.
5.Press EXIT repeatedly.
60
