Names of controls and parts
13
III

Turning the power on and off

When the power is turned ON, the last source
mode (such as CD and tuner) used prior to
turning OFF the power will be restored.
When the vehicle has no ACC position on the
ignition switch, care is needed when turning off
the main unit. Follow Step 2 or Step 3 when
turning off the power.
The power will come ON.
ATTENTION
When the main unit's power is turned on for
the first time or if the battery terminals have
been disconnected because of vehicle
maintenance and the power is then turned
back on, the main unit will start up in FM1
mode. After this, the broadcast stations will
be searched for automatically and stored in
the buttons [1] to [6].
The power will go OFF and the main
unit will be in standby.
If you press the [PWR] button again for
more than one second, the power will
completely go OFF.
The power will completely go OFF.
ATTENTION
If a car is not equipped with an ACC position,
press the [PWR] button for more than two
seconds.
1When power is OFF, press the
[PWR] button.
2When power is ON, press the
[PWR] button for less than two
seconds.
3When power is ON, press the
[PWR] button for more than two
seconds.