ESN security operating procedure
37
VIII
ATTENTION
• If the incorrect CD is inserted, an [ERR_ ]
("ERR" and error number) message will
appear for two seconds, after which the CD
will be ejected.
• If [ERR5] (the 5th time an error has
occurred) appears, [HELP] will appear, after
which the CD will be ejected. When [HELP]
appears, carry out the operations for an
ESN security lock out by following the
procedure in "What happens if an incorrect
CD is inserted?" on page 37.
• You must use the CD used for Key CD
programing; a duplicate CD may not work
properly.
What happens if an incorrect CD is
inserted?
After the [HELP] message appears for
five seconds, serial number will
appear.
After the [SEC] message appears for
two seconds, rolling code (six digit) will
appear.
[DISC] flashes on the display.
You will have five more attempts to
insert a correct disc.
If the correct CD is inserted, an [OK]
message will appear for two seconds
and the CD will be ejected.
ATTENTION
• If an incorrect CD is inserted, an [ERR_ ]
("ERR" and error number) message will
appear for two seconds, after which the CD
will be ejected.
• This process cancels the protection of ESN
main unit.
1After the 5th incorrect attempt, the
display reads [HELP] for five
seconds.
2Press the [CD ] button to close
the front panel.
3Press the [FUNC] button, then the
button [6], and hold them for five
seconds.
4Press the [FUNC] button.
5Insert the Key CD into the slot.