Eclipse - Fujitsu Ten CD5000 manual Automatic parametric equalizer Advance Mode Only

Various Settings

•Automatic parametric equalizer (Advance Mode Only)

This can be used to automatically correct distortion in frequency characteristics (peaks and dips) based on the results of measuring the frequency characteristics inside the vehicle.

Automatic parametric equalizer correction is carried out in the following steps.

Time alignment and crossover adjustment

(Refer to "Time alignment adjustment" and "Crossover adjustment" for details. In addition, adjustment and settings can be carried out using the ECLIPSE web site.)

Frequency characteristic measurement

(Refer to "Measuring/display frequency characteristics" for details.)

Saving sound quality data

(The folders and files that are required for E-iSERV sound effect customizations are created automatically when the data is written to the Memory Stick. Refer to "Measuring/display frequency characteristics" for details.)

ECLIPSE web site accessing

(Access the following URL: http://www.e-iserv.jp)

Automatic parametric equalizer adjustment (Follow the instructions given on the web site.)

Correction data downloading

(Follow the instructions given on the web site.)

Correction data reading

(Refer to "Importing Sound Data" for details.)

•Time alignment and crossover adjustment

Other adjustments besides adjustment of this main unit can be carried out using the ECLIPSE web site. The procedure for doing this is displayed on the screen, and adjustment is comparatively easy using this method. Access the ECLIPSE web site and follow the instructions that appear on the screen. After doing this, download the adjusted data for the CD-R or Memory Stick and load it into the main unit. (Refer to “Importing Sound Data“ for details of reading the adjustment data.)

URL: http://www.e-iserv.jp

58