Eclipse - Fujitsu Ten CD5000 Switching audio control modes, VOL Bass MID Treb BAL FAD NON-F SVC

How to operate the AUDIO CONTROL

Switching audio control modes

Various audio control modes may be fine-tuned by following this procedure.

Press the [AUDIO CONTROL] button for less than one second to select the item

1 to be adjusted.

Modes will switch in the order shown below each time the button is pressed. When the Sound mode is set to the Advance mode:

VOL ➔ BAL*1 ➔ FAD*1 ➔ NON-F ➔ SVC

When the Sound mode is set to the Normal mode:

VOL ➔ BASS ➔ MID ➔ TREB ➔ BAL ➔ FAD ➔ NON-F ➔ SVC

*1: Adjustments cannot be made when the position selector or CS II is ON.

*2: Setting cannot be made in FM mode.

Mode	Function	[AUDIO CONTROL] button
		Turn to the Left	Turn to the Right
VOL (VOLUME)	Adjusts volume.	Decreases the	Increases the
		volume.	volume.
BASS	Adjusts bass level. Bass mode can be	Softens low sounds.	Emphasizes low	X
	adjusted for each source (CDP/CDC, FM,		sounds.
	AM and Memory stick player).
	Adjusts middle level. Mid mode can be	Softens medium	Emphasizes medium
MID (MIDDLE)	adjusted for each source (CDP/CDC, FM,
		sounds.	sounds.
	AM and Memory stick player).
	Adjusts treble level. Treble mode can be		Emphasizes high
TREB (TREBLE)	adjusted for each source (CDP/CDC, FM,	Softens high sounds.
			sounds.
	AM and Memory stick player).
BAL (BALANCE)	Adjusts left/right speaker balance.	Emphasizes left	Emphasizes right
		speakers.	speakers.
FAD (FADER)	Adjusts front/rear speaker balance.	Emphasizes rear	Emphasizes front
		speakers.	speakers.
NON-F (NON-FADER)	Adjusts non-fader level (for connected	Decreases level.	Increases level.
	sub-woofers, etc.).
	Adjusts different volume levels for each
SVC (Source Volume	audio mode. When SVC is set, the	Decreases the SVC	Increases the SVC
	volume level can change as shown in the
Control)		setting level.	setting level.
	example settings in the table on the next
	page.

51