Eclipse - Fujitsu Ten CD5000 How to operate the main unit with an optional CD changer connected

80
About optional equipment
How to operate the main unit with an optional
CD changer connected
This section covers the operation of an optional
CD changer that is connected to the main unit.
To switch from another mode, press the [DISC]
button for less than one second.
Listening to a CD
Each press of the button switches the
mode from CD player ➔ CD Changer
1 ➔ CD Changer 2 ➔ CD player.
A changer or player with no discs
loaded will be skipped.
Advancing to the next track or
returning to the beginning of
the track being played
Turn to the right:Advances to the next
track.
Turn to the left:
Returns to the beginning
of the track being played.
(Repeat turning for the previous
tracks.)
Fast Forward/Rewind
Fast forward or rewind the song currently being
played.
[] button: Fast forward.
[] button: Rewind.
Playing the beginning of tracks
(SCAN)
Pressing the button for less than one
second causes the changer to move
up to the next track and play it for 10
seconds, then move up to the next
track and play it for 10 seconds, and
so on, on one CD, until the button is
pressed again.
Press the button for longer than a
second to play the first 10 seconds of
the first track of every loaded CD.
ATTENTION
• To continue playing a desired track, press
the button again to stop scanning.
• After the entire disc is scanned once,
ordinary playback starts from the point
where scanning started.
Repeating the same track
(REPEAT)
Pressing on the button for less than
one second causes the changer to
repeat the track currently being
played, until the button is pressed
again.
Press the button for longer than a
second to repeat all the tracks on the
CD being played.
1Press the [DISC] button for less
than one second.
1Turn the [SEL] button to the left or
right.
1Press and hold the [ ] or [ ]
button.
1Press the [4 SCAN] button.
1Press the [5 RPT] button.