How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only)
85
XVIII

Direct channel selection

The channel can be selected by inputting the
channel directly.
The mode will change to direct
channel selection mode.
[1] button ..........Hundreds
[2] button ..........Tens
[3] button ..........Units
Each time the buttons are pressed, the
numerals change in the following
order.
0 ➔ 1 ➔ 2 ➔ 3 ➔ 4 ➔ 5 ➔ 6 ➔ 7 ➔ 8
➔ 9
Pressing the [6] button clears the
numeral at the previous digit.
Starts reception.

Manually setting channels into

memory

This section covers the setting of channels in
memory under the numbered buttons.
The channel to which you have tuned
is now memorized and set in the
selected button. Repeat the
procedure to set the channels to which
you have manually tuned in addition in
memory, in turn, for the buttons [1] to
[6]. These buttons are called the
preset buttons.
ATTENTION
If the vehicle’s battery is disconnected (for
repairs to the vehicle or for removing the main
unit), all the channels in memory will be lost. In
such a case, set the channels in memory
again.

Preset channel scan

This function enables reception of all the
channels in the preset buttons for five seconds
each.
[P SCAN] will appear on the display,
and the channels stored under the
preset buttons [1] to [6] will be played
for five seconds each.
The main unit will stay tuned to the
desired channel.

Switching displays when using

the SIRIUS satellite radio

Each time the button is pressed the
display item changes in the following
order:
channel name ➔ category name ➔
title ➔ artist ➔ SIRIUS unit ID.
ATTENTION
• The maximum number of characters that
can be displayed for each item is as follows:
Title: 38 characters
Artist: 38 characters
Channel: 20 characters
Category: 16 characters
• If there is no name, NO_ DATA will appear.
1Press and hold the [SEL] button for
more than two seconds.
2Press the buttons [1], [2] and [3] to
select the channel number to be
input.
3Press the button [5].
1Turn the [SEL] button to the right
or left to tune to the channel to be
entered in memory.
2Select any button, from [1] to [6],
and press it for more than two
seconds.
1Press the [SEL] button for less
than two seconds.
2To stop the preset scan mode at a
desired channel, press the [SEL]
button again.
1Press the [ILUM] button for more
than one second.