Edimax Technology AR-7211B V2 specs

5.Enter your ISP’s username and password and click “Apply”. On the next screen, click “Apply” again.

23

Image 23

Edimax Technology AR-7211B V2 manual

Contents

AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others System Requirements Package ContentsSafety Precautions Adsl LED & Button Definitions LAN  DMZ Features Napt  DNS Connect the router to your LAN network ConfigurationConnect the Adsl line No telephone before the splitter Check the Adsl LED status Firewall settingsPC LAN IP configuration Page Select Internet Protocol TCP/IP and then click Properties Page Windows Vista and Windows XP Windows Windows Vista Windows XP Page Setup Wizard EZmax Setup Wizard Please select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Accessing the Router Web Configuration VCI Internet ConnectionField Description VPI PPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged Dhcp Server Field Description LAN Interface SetupLAN IP 192.168.2.1 Device Info Status WAN LAN Adsl Statistic Statistics LAN IP NetworkARP Duplex,10Mbps/FullDuplex,10Mbps/Half Downlist100Mbps/FullDuplex,100Mbps/Half Current Allowed MAC Address Table Current Allowed MAC Address Table can accessField Description Duplex,Auto Negotiation MAC Field Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp WAN Dhcp Static IP MER, PPPoE, PPPoA, 1483 Routed or IPoA On Demand or Manual PPP SettingsWAN IP Settings PVC into the Current ATM VC Table If you choose Connect on Demand ATM VCCVPI/VCI Auto PVC Bridged PPPoE or Disable BridgeMacclone PCR ATM SettingsCBR, nrt-VBR or rt-VBR MBS Adsl SettingsCdvt SCR DNS Service DynDNS.org or TZO Ddns MAC Filter Firewall2.1. IP/Port Filter URL Filter Software Forbidden Anti-DoS Upnp TR-069 Igmp Proxy Connection Request URLACS ACL Debug To the Current ACL Table You can choose Interface or IP Address Static Route AdvancedRouting RIP NAT RIP Virtual Server  If User-defined Service Name is selected, you NAT Forwarding ALG NAT Port Trigger NAT Exclude IP 2.8 NAT IP Mapping FTP ALG Port IP QoS You can choose strict prior or WFQ You can choose stream based, 802.1p based or Dscp Based Snmp You can choose Normal Service, Minimize CostMinimize Delay Maximize Reliability, Maximize Throughput, or Field Description Others Client Limit Update AdminCommit/Reboot  Restore to the factory default configuration Backup/Restore Upgrade Firmware Log Password Time NTP Configuration Traceroute DiagnosticPing Ping OAM Loopback Dscp Diag-Test Adsl Statistics 255.255.255.0, respectively Trouble Shooting Declaration of Conformity