Igmp Proxy, TR-069 | Edimax Technology AR-7211B V2 specification

5.5.4.IGMP Proxy

Choose Service > IGMP Proxy, and you will see the following page. An IGMP proxy enables the system to issue IGMP host messages on behalf of hosts that the system discovered through standard IGMP interfaces. The system acts as a proxy for its hosts after you enable it.

5.5.5.TR-069

Choose Service > TR-069, and you will arrive at the following page. Here, you can configure the TR-069 CPE.

62

Image 62

Edimax Technology AR-7211B V2 manual Igmp Proxy, TR-069

Contents

AR-7211A V2 / AR-7211B Copyright Contents Routing NAT IP QoS Snmp Others System Requirements Package ContentsSafety Precautions LED & Button Definitions Adsl LAN  DNS Features Napt  DMZ Connect the router to your LAN network ConfigurationConnect the Adsl line No telephone before the splitter Check the Adsl LED status Firewall settingsPC LAN IP configuration Page Select Internet Protocol TCP/IP and then click Properties Page Windows Windows Vista and Windows XP Windows Vista Windows XP Page EZmax Setup Wizard Setup Wizard Please select your product Page Page Page Page Internet Connection Type Parameter VPI VCI Bridge Mode Dynamic IP Address Static IP Firmware Upgrade Web Configuration Accessing the Router VPI Internet ConnectionField Description VCI PPPoE/PPPoA On Demand, or Manual 2 MER/1483 Routed Bridged 192.168.2.1 Field Description LAN Interface SetupLAN IP Dhcp Server Status Device Info LAN WAN Statistics Adsl Statistic LAN IP NetworkARP Downlist100Mbps/FullDuplex,100Mbps/Half Duplex,10Mbps/FullDuplex,10Mbps/Half MAC Current Allowed MAC Address Table can accessField Description Duplex,Auto Negotiation Current Allowed MAC Address Table Field Description Field Description If set to Dhcp Relay, the router acts a surrogate Dhcp Dhcp Static IP WAN MER, PPPoE, PPPoA, 1483 Routed or IPoA On Demand or Manual PPP SettingsWAN IP Settings PVC into the Current ATM VC Table If you choose Connect on Demand ATM VCCVPI/VCI Auto PVC Bridged PPPoE or Disable BridgeMacclone PCR ATM SettingsCBR, nrt-VBR or rt-VBR SCR Adsl SettingsCdvt MBS Service DNS Ddns DynDNS.org or TZO MAC Filter Firewall2.1. IP/Port Filter URL Filter Anti-DoS Software Forbidden Upnp Igmp Proxy TR-069 Connection Request URLACS Debug ACL To the Current ACL Table You can choose Interface or IP Address Static Route AdvancedRouting RIP RIP NAT  If User-defined Service Name is selected, you Virtual Server NAT Forwarding NAT ALG NAT Exclude IP Port Trigger FTP ALG Port 2.8 NAT IP Mapping IP QoS You can choose stream based, 802.1p based or Dscp Based You can choose strict prior or WFQ Maximize Reliability, Maximize Throughput, or You can choose Normal Service, Minimize CostMinimize Delay Snmp Field Description Client Limit Others  Restore to the factory default configuration AdminCommit/Reboot Update Upgrade Firmware Backup/Restore Password Log NTP Configuration Time Ping DiagnosticPing Traceroute Dscp OAM Loopback Adsl Statistics Diag-Test Trouble Shooting 255.255.255.0, respectively Declaration of Conformity