| Field |
| Description |
|
| IP QoS |
| Select to enable or disable IP QoS function. You need |
|
|
|
| to enable IP QoS if you want to configure the |
|
|
|
| parameters of this page. |
|
| QoS Policy |
| You can choose stream based, 802.1p based or DSCP |
|
|
|
| based. |
|
| Schedule Mode |
| You can choose strict prior or WFQ (4:3:2:1). |
|
| Source IP |
| The IP address of the source data packet. |
|
| Source Mask |
| The subnet mask of the source IP address. |
|
| Destination IP |
| The IP address of the destination data packet. |
|
| Destination Mask |
| The subnet mask of the destination IP address. |
|
| Source Port |
| The port of the source data packet. |
|
| Destination Port |
| The port of the destination data packet. |
|
| Protocol |
| The protocol responds to the IP QoS rules. You can |
|
|
|
| choose TCP, UDP, or ICMP. |
|
| Phy Port |
| The LAN interface responds to the IP QoS rules. |
|
| Set priority |
| The priority of the IP QoS rules. P0 is the highest |
|
|
| 76 |
| |
