Edimax Technology AR-7211B V2 manual PVC into the Current ATM VC Table, Field, Description

Field		Description
Remote IP Address	Enter the gateway IP address provided
	by your ISP.
Netmask	Enter the subnet mask of the local IP
	address.
Unnumbered	Check	this box	to	enable IP
	unnumbered function.
	After configuring the parameters of
Add	this page, select “Add” to add a new
	PVC into the Current ATM VC Table.
	Select a PVC in the Current ATM VC
Modify	Table, then modify the parameters of
	this PVC. When finished, click “Modify”
	to apply the settings of this PVC.
	This table shows existing PVCs. It
	shows the interface name, channel
	mode,	VPI/VCI, encapsulation mode,
Current ATM VC Table	local IP address, remote IP address and
	other	information.	The	maximum
	number of items that can be added to
	this table is eight.
	Click this icon to modify the PVCs’
	parameters.

After adding a PPPoE ATM VC, and clicking in PPPoE mode, the following page will appear. In this page, you can configure the parameters of this PPPoE PVC.

51