Edimax Technology BR-6641 WAN Link Health Detection:

BR-6641 User Manual
29
Basic Setting:
Field Value Description
Down Stream The down stream (inbound) bandwidth of the
WAN link, for example 25600 (Kbps).
Up Stream The up stream (outbound) bandwidth of the
WAN link, for example 25600 (Kbps).
Port Speed Auto
10Mbps/Half duplex
10Mbps/Full duplex
100Mbps/Half
duplex
100Mbps/Full duplex
The speed and duplex of WAN Port. You can
set it manually or system can got it
automatically.
Health
Detection
Never
Always
Only when no
packet is received
This function is used to configure the WAN
link health detection mechanism for the
specific WAN link.
Address IP Address
IP Range
Input the IP Address of BR-6641 in WAN. It
can be:
IP Address
IP Range
Gateway Input the predefined Gateway, e.g.:
211.21.40.254.
Subnet Mask Input the Subnet Mask.
IP(s) in DMZ IP Address
IP Range
Input the IP Address of BR-6641 in DMZ. It
can be:
IP Address
IP Range
Table 3.1 Standard Mode / Basic Setting
WAN Link Health Detection:
This function allows MIS to configure how WAN link health detection is performed.
By fine-tuning certain parameters, an MIS can adjust BR-6641 to match a
particular network structure and/or a particular ISP.
For WAN link health detection, BR-6641 sends out ICMP or TCP packets and
monitors responses to determine the statuses of those links. In the WAN Link