are still reachable via other live WAN links.
In order to let your Multihoming function properly, you must make sure that the requirements listed below are met.
Prerequisites for Multihoming:
Multiple WAN links (at least two).
Registered domain names for your publicly accessible servers.
Your publicly accessible servers must be configured as virtual servers, or have public IP addresses.
By default, Multihoming is switched off. To use this service, check the check box to the right of “Enable Multihoming” on the top of the page. There are three tables for configuring your Multihoming settings. The first table lets you define the global parameters. The second table is used to configure your domain name settings.
Global Setting
Specify the PTR data in this field, including TTL, IP Address, and Host Name for reverse looking up the host name of corresponding IP Address.
71
