|
|
|
|
| ||
|
|
|
|
|
| |
| Field | Value |
| Description |
| |
|
|
|
|
|
|
|
| Down Stream |
|
|
| The down stream (inbound) bandwidth of the |
|
|
|
|
|
| WAN link, for example 25600 (Kbps). |
|
| Up Stream |
|
|
| The up stream (outbound) bandwidth of the |
|
|
|
|
|
| WAN link, for example 25600 (Kbps). |
|
| Port Speed | Auto |
|
| The speed and duplex of WAN Port. You can |
|
|
| 10Mbps/Half duplex | set it manually or system can get it |
| ||
|
| 10Mbps/Full duplex | automatically. |
| ||
|
|
|
| |||
|
| 100Mbps/Half |
|
|
| |
|
| duplex |
|
|
|
|
|
| 100Mbps/Full duplex |
|
| ||
| Health | Never |
|
| This function is used to configure the WAN |
|
| Detection | Always |
|
| link health detection mechanism for the |
|
|
| Only | when | no | specific WAN link. Please refer to Chapter |
|
|
| 3.2.1 WAN Link Health Detection. |
| |||
|
| packet is received |
| |||
|
|
|
| |||
| Subnet in WAN |
|
|
|
|
|
| Address | IP Address |
| Input the private IP address of |
| |
|
| IP Range |
| connected with the router. There are two |
| |
|
|
|
|
| options available: |
|
|
|
|
|
| IP Address |
|
|
|
|
|
| IP Range |
|
| Gateway |
|
|
| Input the predefined Gateway, e.g.: |
|
|
|
|
|
| 192.168.99.1. |
|
| Subnet Mask |
|
|
| Input the Subnet Mask. |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| IP |
|
|
| Input the public IP of |
|
|
|
|
|
|
|
|
| Subnet Mask |
|
|
| Input the Subnet Mask. |
|
Table 3.6 The description of the fields in Advanced Mode
38
