Edimax Technology BR-6641 user manual Administrator Password, Monitor Password, Firmware Update

BR-6641 User Manual

You can reset BR-6641 to its factory default state. In doing this, you will lose your entire customized configuration.

Finally, you can reboot BR-6641. Due to web interface limitations. There will not be any messages after you have rebooted the system. Wait two minutes or so and try to re-connect to BR-6641 using the browser.

Administrator Password:

Here, you can add, delete, or modify administrator’s account and password.

Field	Value	Description
New Password		Enter the new password here.
Confirm		Enter the new password here again.
Set Password		Click the button to enable the new
		password.

Monitor Password:

Here, you can add, delete, or modify Monitor’s account and password.

Field	Value	Descreption
Password		Enter the new password here.
Confirm		Enter the new password here again.
Set Password		Click the button to enable the new
		password.

Firmware Update:

Push the Update button and follow the following instruction to start the firmware update process.

Obtain the latest firmware pack from your SI or VAR

23