Setting the Projector Using RS-232C or Telnet
When Connecting Using Telnet
1 Click“start”from theWindows® desk- top and select “Run”.
2 Enter“telnet 192.168.150.2”in the text box that opens up. (If the IP address of the projector is 192.168.150.2.)
3 Click the “OK” button.
4 “User Name:” is displayed. Input the user name and press the “Enter” key.
•If a user name has not yet been set, just press the “Enter” key.
5 “Password:” is displayed. Input the password and press the “Enter” key.
•If a password has not yet been set, just press the “Enter” key.
6 Input “setup” and press the “Enter” key.
▼SETUP MENU
SETUP | ||
| ||
[1]IP Address | [2]Subnet Mask | [3]Default Gateway |
[4]User Name | [5]Password |
|
[7]Projector Name |
| |
[A]Advanced Setup |
| [D]Disconnect All |
[V]View All Setting | [S]Save & Quit | [Q]Quit Unchanged |
setup> |
|
|
|
|
|
Note
•If the IP address has been changed, ensure to enter the new IP address in step 2.
•User name and password are not set in the fac- tory default settings.
•If the user name or password is entered incor- rectly three times in steps 4 or 5, SETUP MENU will be quit.
•SETUP MENU will be displayed.
29
