Stack Projection
6 Connect the INPUT 1 terminal on the projector 1 to the RGB output terminal on the computer using the RGB cable.
(See page 27 on the owner’s manual of the projector.)
7 Connect the OUTPUT (FOR INPUT 1, 2) terminal on the projector 1 to the INPUT 1 terminal on the projec- tor 2 using an RGB cable.
(See page 36 on the owner’s manual of the projector.)
Note
•When connecting an RGB cable to the pro- jector 2, use the input terminal that has the same number as the projector 1. (IN- PUT 1 terminal, in this case)
8 Connect the LAN terminal on the projector 1 to the LAN terminal on the projector 2 using a commer- cially available LAN cable (UTP cable, Category 5,
9 Turn on the projectors first, then turn on the computer.
Application
When inputting multiple image sources, refer to the example below.
INPUT 1 terminal | RGB cable |
Projector 1
Projector 1:
Master
INPUT 2 terminals INPUT 4 terminal
OUTPUT (FOR INPUT 1, 2) 
terminal
LAN terminal |
Computer
Master
Set Inputs
INPUT1 | ON |
INPUT2 | ON |
INPUT3 | OFF |
INPUT4 | ON |
INPUT5 | OFF |
| RGB | LAN cable |
|
|
|
| cable |
|
|
| |
|
| Projector 2 | |||
|
|
| |||
INPUT 1 terminal |
| type) |
| Slave | |
|
|
| 5 BNC to | ||
Projector 2: |
|
| Set Inputs | ||
|
| ||||
|
| INPUT1 | ON | ||
Slave |
|
|
| ||
|
|
| INPUT2 | OFF | |
|
| LAN terminal | Computer | INPUT3 | OFF |
|
|
| INPUT4 | ON | |
|
|
|
| ||
INPUT 4 terminal |
|
|
| INPUT5 | OFF |
|
|
|
|
| |
|
| Distributor |
|
| |
| Composite video cable | Video equipment |
|
| |
|
|
|
|
| |
40
