User Name Setting, RS-232C Baud Rate Set | Eiki/Elf EIP-4500

Controlling the Projector Using RS-232C or Telnet

User Name Setting

([4]User Name)

Carrying out security protection using user name.

setup>4			1
User Name	:
Please Enter	: EIP-4500			2

(change)	—> EIP-4500		*

1Enter “4” and press the “Enter” key.

2Enter user name and press the “Enter” key. Display set user name (*).

Note

•User name can be up to 8 characters.

•You can input the characters below : a-z, A-Z, 0-9, -, _

•In the default state, user name is not set.

RS-232C Baud Rate Set-

ting ([6]RS-232C Baud Rate)

Setting of baud rate for RS-232C (COMPUTER and PROJECTOR) terminals.

setup>6				1
note: It sets both RS-232C (COMPUTER) and RS-232C (PROJECTOR).
0	...	9600 bps
1	...	38400 bps
2	... 115200 bps
Baud Rate Select[0-2] :2					2

RS-232C Baud Rate : 115200 bps				*

1Enter “6” and press the “Enter” key.

2Select and enter the number 0, 1 or 2 and press the “Enter” key.

Display set baud rate (*).

Note

•Set the projector’s baud rate to the same rate as that used by the computer.

Password Setting

([5]Password)

Carrying out security protection using password.

setup>5			1
Password	:
Please Enter	: eiki4500			2

(change)	—> eiki4500		*

1Enter “5” and press the “Enter” key.

2Enter password and press the “Enter” key. Display set password (*).

Projector Name Setting

([7]Projector Name)

It is possible to assign a projector name.

setup>7
Projector Name	: EIP-4500
Please Enter	: MY EIP-4500
(change) —>	MY EIP-4500

1Enter “7” and press the “Enter” key.

2 Enter projector name. Display set projector name (*).

1

2

*

Note

•Password can be up to 8 characters.

•You can input the characters below : a-z, A-Z, 0-9, -, _

•In the default state, the password is not set.

Note

•Projector name can be up to 12 characters.

•You can input the characters below : A-Z, 0-9, -, _, (, ), space

(When “a-z” are input, they are converted to “A-Z” automatically.)

•It is the same as the name which can be con- firmed or set, using RS-232C commands “PJN0”, “PJN1”, “PJN2” and “PJN3”.

34

Image 34

Eiki/Elf EIP-4500 setup guide User Name Setting, RS-232C Baud Rate Set, Password Setting, Projector Name Setting

Contents

Setup Guide Setting up the Screen Standard Setup Front Projection Screen Size and Projection Distance Throw Distance Standard Zoom Lens Standard equipment with EIP-4500 F1.8-F2.0, f=25.6-31.3 mm Fixed Wide Lens AH-45201 F2.5, f=11.6 mm Wide-zoom Lens AH-45301 F2.5, f=21.2-25.8 mm Tele-zoom Lens AH-45501 F2.4-F2.5, f=31.9-42.5 mm Tele-zoom Lens AH-45601 F2.5, f=40.8-62.8 mm Tele-zoom Lens AH-45701 F2.4-F2.5, f=62.1-97.8 mm Connecting Pin Assignments RGB Input Component Input Connecting Pin Assignments Computer control Communication conditions RS-232C Specifications and CommandsBasic format Commands W R Return Input 5 Tint -30 +30 OK or ERR CLR Temp Setting up the Projector Network Environment Connecting the projector to a computer Connecting the Pro- jector to a Computer Turn on the projector Turn on the computer Setting an IP Address for the Computer Confirm or change an IP address for the setup computer Setting up a Network Connection for the Projector After setting items, wait for 10 seconds and then re-access Controlling the Projector via LAN Controlling the Projector Using Internet ExplorerVersion 5.0 or later Status Status Confirming the ProjectorControlling the Projector Control Projector Settings & Adjustments Setting and AdjustingSetting the Security Network Security Mail Originator Settings Making General Settings for the Network NetworkSetting for Sending E-mail when an Error Occurs General Mail Recipient Settings Input setup and press the Enter key Setting the Projector Using RS-232C or TelnetWhen Connecting Using RS-232C Input PJS11234 and press the Enter key When Connecting Using Telnet Clickstartfrom theWindows desk- top and select Run Setup Menu Main Menu 4User Name Factory default setting Not Re- quired VView All Setting Controlling the Projector Using RS-232C or TelnetView Setting Detail List Set Items SSave & Quit Save Settings and QuitQuit without Saving Set Tings QQuit Unchanged Default Gateway Setting IP Address SettingSubnet Mask Setting Projector Name Setting User Name SettingPassword Setting RS-232C Baud Rate Set Entering Advanced Setup Menu Disconnecting All ConnecSetting Auto Logout Time Data Port Setting Carrying out Network Ping Test Setting of Accept IP Ad- dressAccepting All IP Addresses Return to Default Settings Setting of Search PortReturn to Main Menu Stack Projection Projector 2 Slave Setting up the Stack ProjectionProjector 1 Master Turn off the both projectors Projector Projector MasterSlave Video Wall Projection Hub Setting up the Video Wall Projection Basic Select 2 X 2 on Division Access one of the four projectors via Internet ExplorerClick Video Wall on the menu Click the assigning button for the desired position Assigning the Projected Image on the Video Wall Setup Adjusting the Position Horizontally and VerticallyReturning to the Default Video Wall Setup Select 1 X 1 on Division Click the assigning button Video Wall Projection Setting up the Video Wall Projection Application Projector Slave Projector Master Projector 2 Slave Change the TCP/IP settings for the computer as shown belowJectors as shown below Projector 3 Slave Click Stack on the menu Select Slave on Stack Setting Click Stack on the menu Select Master on Stack SettingMake the IP address for each pro- jector as shown below Repeat the same procedure from the to 12 for the projector 3 Troubleshooting When connecting the projector using serial-connection Troubleshooting \ After the initialization, carry out setting again Dimensions Units inches mm