IP Address Setting, Default Gateway Setting | Eiki/Elf EIP-4500

Controlling the Projector Using RS-232C or Telnet

The setting procedure for each item will be explained. For the basic procedure, please refer to “Set Items” on page 31.

IP Address Setting

([1]IP Address)

Setting of IP address.

setup>1
IP Address		:192.168.150.2
Please Enter		:192.168.150.3
(change)	—>	192.168.150.3

Default Gateway Setting

([3]Default Gateway)

Setting default gateway.

1	setup>3	1
	note: “0.0.0.0” means “Using no default gateway.”

2Gateway Address :0.0.0.0

*	Please Enter	:192.168.150.1		2

	(change)	—> 192.168.150.1	*

1Enter “1” and press the “Enter” key.

2Enter numerical value to be set and press the “Enter” key.

Display IP address after change (*).

1Enter “3” and press the “Enter” key.

2Enter numerical value to be set and press the “Enter” key.

Display gateway address after change (*).

Subnet Mask Setting

([2]Subnet Mask)

Setting subnet mask.

setup>2			1
Subnet Mask	:255.255.255.0			2
Please Enter	:255.0.0.0

(change) —>	255.0.0.0		*

1Enter “2” and press the “Enter” key.

2Enter numerical value to be set and press the “Enter” key.

Display subnet mask after change (*).

Note

•If the values for IP Address, Subnet Mask or Gate- way of the projector have been changed via Telnet, the computer cannot be connected to the projector depending on the computer’s network settings.

33

Image 33

Eiki/Elf EIP-4500 setup guide IP Address Setting, Default Gateway Setting, Subnet Mask Setting

Contents

Setup Guide Standard Setup Front Projection Setting up the Screen Throw Distance Screen Size and Projection Distance F1.8-F2.0, f=25.6-31.3 mm Standard Zoom Lens Standard equipment with EIP-4500 F2.5, f=11.6 mm Fixed Wide Lens AH-45201 F2.5, f=21.2-25.8 mm Wide-zoom Lens AH-45301 F2.4-F2.5, f=31.9-42.5 mm Tele-zoom Lens AH-45501 F2.5, f=40.8-62.8 mm Tele-zoom Lens AH-45601 F2.4-F2.5, f=62.1-97.8 mm Tele-zoom Lens AH-45701 RGB Input Component Input Connecting Pin Assignments Connecting Pin Assignments RS-232C Specifications and Commands Computer control Communication conditionsBasic format W R Commands Return Input 5 Tint -30 +30 OK or ERR CLR Temp Connecting the projector to a computer Setting up the Projector Network Environment Turn on the projector Turn on the computer Connecting the Pro- jector to a Computer Setting an IP Address for the Computer Confirm or change an IP address for the setup computer Setting up a Network Connection for the Projector After setting items, wait for 10 seconds and then re-access Controlling the Projector Using Internet Explorer Controlling the Projector via LANVersion 5.0 or later Controlling the Projector Confirming the ProjectorStatus Status Control Setting the Security Setting and AdjustingProjector Settings & Adjustments Network Security Setting for Sending E-mail when an Error Occurs Making General Settings for the Network NetworkMail Originator Settings General Mail Recipient Settings When Connecting Using RS-232C Setting the Projector Using RS-232C or TelnetInput setup and press the Enter key Input PJS11234 and press the Enter key Clickstartfrom theWindows desk- top and select Run When Connecting Using Telnet 4User Name Factory default setting Not Re- quired Setup Menu Main Menu View Setting Detail List Controlling the Projector Using RS-232C or TelnetVView All Setting Set Items Quit without Saving Set Save Settings and QuitSSave & Quit Tings QQuit Unchanged IP Address Setting Default Gateway SettingSubnet Mask Setting Password Setting User Name SettingProjector Name Setting RS-232C Baud Rate Set Setting Auto Logout Time Disconnecting All ConnecEntering Advanced Setup Menu Data Port Setting Setting of Accept IP Ad- dress Carrying out Network Ping TestAccepting All IP Addresses Setting of Search Port Return to Default SettingsReturn to Main Menu Stack Projection Projector 1 Master Setting up the Stack ProjectionProjector 2 Slave Turn off the both projectors Projector Master ProjectorSlave Hub Video Wall Projection Setting up the Video Wall Projection Basic Click Video Wall on the menu Access one of the four projectors via Internet ExplorerSelect 2 X 2 on Division Click the assigning button for the desired position Returning to the Default Video Wall Setup Adjusting the Position Horizontally and VerticallyAssigning the Projected Image on the Video Wall Setup Select 1 X 1 on Division Click the assigning button Video Wall Projection Projector Slave Setting up the Video Wall Projection Application Jectors as shown below Change the TCP/IP settings for the computer as shown belowProjector Master Projector 2 Slave Projector 3 Slave Click Stack on the menu Select Master on Stack Setting Click Stack on the menu Select Slave on Stack SettingMake the IP address for each pro- jector as shown below Repeat the same procedure from the to 12 for the projector 3 When connecting the projector using serial-connection Troubleshooting Troubleshooting \ After the initialization, carry out setting again Units inches mm Dimensions