Controlling the Projector Using RS-232C or Telnet
Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the details to be set. Setting is carried out one item at a time, and saved at the end.
View Setting Detail List
([V]View All Setting)
▼SETUP MENU
|
| |||||
[1]IP Address | [2]Subnet Mask | [3]Default Gateway |
|
| ||
[4]User Name | [5]Password |
|
|
| ||
|
|
| ||||
[A]Advanced Setup |
|
| [D]Disconnect All |
|
| |
[V]View All Setting | [S]Save & Quit | [Q]Quit Unchanged |
|
| ||
setup>v |
|
|
|
|
| 1 |
|
|
|
|
| ||
Model Name | : |
|
|
| ||
Projector Name | : |
|
|
| ||
MAC Address | : 00:0b:2c:01:14:00 |
|
|
| ||
IP Address | : 192.168.150.2 |
|
|
|
| |
Subnet Mask | : 255.255.255.0 |
|
|
|
| |
Default Gateway | : Not Used |
|
|
| ||
: 9600 bps |
|
|
| * | ||
|
|
| ||||
Password | : Not Required |
|
|
| ||
**********(Advanced Status)********** |
|
|
| |||
Data Port | : 10002 |
|
|
|
| |
Accept IP Address | : Accept All |
|
|
| ||
Auto Logout Time | : 5 minutes |
|
|
| ||
Search Port | : 9300 |
|
|
|
| |
|
|
|
|
|
|
|
1Enter “v” and press the “Enter” key. Display all setting values(*).
Set Items
Example: When setting IP Address (change from 192.168.150.2 to 192.168.150.3)
▼SETUP MENU
| SETUP MENU |
|
|
| ||||
|
|
|
|
| ||||
[1]IP Address |
| [2]Subnet Mask | [3]Default Gateway |
|
| |||
[4]User Name |
| [5]Password |
|
|
| |||
|
|
| ||||||
[A]Advanced Setup |
|
|
| [D]Disconnect All |
|
| ||
[V]View All Setting | [S]Save & Quit | [Q]Quit Unchanged |
|
| ||||
setup>1 |
|
|
|
|
| 1 | ||
IP Address | : 192.168.150.2 |
|
|
|
| *1 | ||
|
|
|
| |||||
Please Enter | : 192.168.150.3 |
|
|
| 2 | |||
(change) | 192.168.150.3 |
|
|
| *2 | |||
| SETUP |
|
| |||||
[1]IP Address |
| [2]Subnet Mask | [3]Default Gateway |
|
| |||
[4]User Name |
| [5]Password |
|
|
| |||
|
|
| ||||||
[A]Advanced Setup |
|
|
| [D]Disconnect All |
|
| ||
[V]View All Setting | [S]Save & Quit | [Q]Quit Unchanged |
|
| ||||
setup>v |
|
|
|
|
|
|
| 3 |
|
|
|
|
|
|
| ||
Model Name |
| : |
|
|
| |||
Projector Name |
| : |
|
|
| |||
MAC Address |
| : 00:0b:2c:01:14:00 |
|
| *3 | |||
IP Address |
| : 192.168.150.3 |
|
|
| |||
|
|
|
| |||||
Subnet Mask |
| : 255.255.255.0 |
|
|
|
| ||
Default Gateway |
| : Not Used |
|
|
| |||
|
|
| ||||||
Password |
| : Not Required |
|
|
| |||
**********(Advanced Status)********** |
|
|
| |||||
Data Port |
| : 10002 |
|
|
|
|
| |
Accept IP Address | : Accept All |
|
|
| ||||
Busy Reply |
| : ERR+<CR> code |
|
|
| |||
Input Hold Time |
| : 1000 milliseconds |
|
|
| |||
Auto Logout Time | : 5 minutes |
|
|
| ||||
Search Port |
| : 9300 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
1Enter “1” (number of item to be set), and press
the “Enter” key.
Display current IP address (*1).
2Enter IP address to be set and press the “En- ter” key.
Display IP address after change (*2).
3Enter “v” and press the “Enter” key to verify setting detail list.
IP address is being changed (*3).
Note
•Verification of setting detail list can be omitted.
•Setting details are not effective until they have been saved. (Page 32)
•If an invalid number is entered, an error message (“Parameter Error!”) will be displayed.
31
