Control the Projector
Service
This function sets parameters for service items of the projector. As these service items are used mainly for maintenance, please use the default set- ting unless a change is needed.
Item | Description |
Fan Control |
|
Speed | Sets fun control speed with |
| Maximum or Normal. |
Prohibition | Sets the prohibition of the pro- |
| jector control by the remote |
| control or the keys on the pro- |
| jector. |
Item | Description |
Video System | ....Displays the current video sys- |
| tem mode. |
H Area* | Adjusts the horizontal effective |
| area. |
VArea* ..............Adjusts the vertical effective area. H Position* ........moves image horizontally
V Position* ........moves image vertically.
* It can not be displayed in the computer mode.
To restore the setting, press the Default but- ton.
- The indication of video system in this page is displayed as follows.
| Video System | Input Signal |
|
|
|
|
|
| ENGLISH | ||
| 480I | NTSC [VIDEO], |
|
| |
|
|
|
| ||
| 480P | NTSC [Y, Cb/Pb, Cr/Pr] |
|
|
|
| 575I | PAL [VIDEO], |
|
|
|
| 575P | PAL [Y, Cb/Pb, Cr/Pr] |
|
|
|
| |||||
| 720P | [Y, Pb, Pr] |
|
|
|
| 1035I | [Y, Pb, Pr] |
|
|
|
| 1080I60 | [Y, Pb, Pr] |
|
|
|
| 1080I50 | [Y, Pb, Pr] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
✐The adjustments of H/V Area and Position are effective only for video input mode. These adjustment values are stored with each video system mode as the above.
Network Board
OWNER’S MANUAL
49
