Faq | Eiki MD13NET guide

Appendix

FAQ

Installation/Access

QWhy doesn’t the setting page appear in my web browser?

AFollowing causes are possible. Please check them.

1.The projector is not connected to the network. Check LED indicators status (p.11).

-Check the connection of LAN cable if the LINK indicator does not illuminate orange.

-Check the network configuration of the projector if ACT indicator does not

illuminate green.

2.Function “Network” in the projector is not set to“ON”. Set up by using the projector’s on-screen menu (p.14/16).

3.Wrong network configuration of the projector

Check the network configuration of the projector by using the projector’s on- screen menu (p.14/16).

4. Wrong network configuration of the computer.

Check the network configuration of the computer. See chapter “Configure the network of computer” on page 20.

5.The Network Board is used with the default setting. (p.14).

6.The proxy setting of the web browser is not set correctly (p.72).

7.The computer does not provide TCP/IP protocol.

QNo setting page in my web browser? Is the problem in the network or in the projector? I would like to find out the problem whether it is in the network or in the projector

ACheck it by the following steps

1.Disconnect the projector from the network and connect the projector and computer with the UTP cross cable directly.

2.Change network configuration of the computer and projector as shown in the example below.

(Projector setting)
IP Address	: 192.168.0.2
Subnet Mask	: 255.255.255.0
Default gateway	: 0.0.0.0
DNS	: 0.0.0.0

(Computer setting)
IP Address	: 192.168.0.5
Subnet Mask	: 255.255.255.0
Default gateway	: (blank)
DNS	: (blank)

84

Image 84

Eiki MD13NET owner manual Faq

Contents

Installation and Operation of the Network Board Network Board Compliances Federal Communication Commission NoticeTrademark Expression/Abbreviation Use of this manual Contents Use of Serial Port Features Power onWeb Management function Mail Alert function Automatic On/Off using Timer function Multi-control functionControl port ready for external equipment via network Operating Environment Installation Installation Flow of installation Check package p.11 Installation p.12-14 Name and function of each part Mounting Secure the board with two screws supplied Connection of LAN cable Confirmation of network setting menu Network Confirmation of password setting menu DisplayConfirmation of network menu activity Turn on the projector and display the menu on the screen Network configuration Procedure of Connecting the projector to the network Configure the network with the projector Selection of network menu Network How to enter the numbers Restart the Network board Configure the network with the computer English Configure the network of computer Windows 98/95/Me Windows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Basic Setting and Operation Login the setting page of the projectorEnter the IP address Display of main setting Main setting page in the Graphic Mode display Main setting page in the Text Mode display Initial Settings Language Setting Password Setting Date/Time Setting Configure the network Name the projector Mail Setting Smtp Server*1Registering and deleting E-mail addresses Condition selection for sending alert message Examples Type and contents of alert mail Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Items Description Control the projector Input PC Adjustment Picture Save a Set Load a Set System Adjustment Available selection when the VIDEO/S-VIDEO inputAvailable selection when the Y, Cb/Pb, Cr/Pr input Image Adjustment Save a image adjustment value Load a image mode Screen Adjustment Sound Adjustment Setting About Lamp Counter reset How to set the Timer Check the Timer events Cancel the timer Getting the current time Service Area Save Actual Adjustment Adjust and set the controlsName the current setting Save the current setting Check the Save items Load a control set Control the projectors menu Projector Make a memo Controlling the Multi-Projectors Multi-Control Register IP address and projec Tor name Check IP address and projec Tor name Exclude/Add/Delete a projec Tor Status Load and apply the setting value Control Control multi-projectors at the same time Use of Serial Port Serial Port setting Use of Serial Port Use of Serial Port Control Examples Example English Use of Telnet Control Use of telnet Command list table Control the projector with Telnet Connection examples Web browser setting Technical data AppendixA Examples of Connection Peer-To-Peer connection Gateway Router installed in the network Theater Web browser setting Active Script/JavaScript enableProxy setting Setting examples OS/Browsers Internet Explorer ActiveScript settingWindows 95/98 Proxy setting Using proxy server Netscape Navigator JavaScript Setting Proxy setting Mac OS Proxy setting Netscape Navigator JavaScript Setting Proxy setting Product specification TCP/IP Port Specification LAN port specificationSerial port specification FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I update the firmware of the Network Board What is the MAC address assigned to the Network Board? What are the rules for IP address assignment? English