Eiki MD13NET Confirmation of network menu activity, Confirmation of network setting menu Network

Installation

[3] Confirmation of network menu activity

When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check chapter “Mounting” on page 12.

Turn on the projector and display the menu on the screen.

Confirmation of network setting menu [Network]

Using the pointers on the remote control handset or on the projector, select the Network icon from the Setting sub menu, and then press the SELECT button once. Check if the setting is On. If not, switch to On by using the pointer ▲ / ▲. The power indicator on this product will illuminate red.

Press the SELECT button again, the network setting menu appears on the screen as follows. For fur- ther information about network set- ting, please see chapter “Network configuration”on the next page.

NETWORK SETTING
IP Address	192	168	0	2
Sub net	255	255	255	0
Gateway	0	0	0	0
DNS	0	0	0	0
			SET	CANCEL

*The above on-screen display may differ from the actual display depending on the functions of the projector you use.

Confirmation of password setting menu [Display]

Using the pointers on the remote control handset or on the projector, select the Display icon from the Setting sub menu, and then press the SELECT button twice. The password setting menu appears on the screen. If not, please check if the function of Network is On as explained on previous item “Confirmation of network setting menu”. For further information about password setting, please see “Password setting menu” on page 17.

Password

0 0 0 0

SET CANCEL

14