Eiki MD13NET owner manual Check the status of projector, Items Description

Check the status of projector

Check the status of projector

In the “Power & Status” page, you can control the projector power, and also you can check the status of the projector as follows. To change the page, click on the page number linked text.

Items	Description
Lamp Mode		Displays 2 lamps or 4 lamps mode and lamp status as below icons with
		Lamp1/Lamp2/Lamp3/Lamp4 order.
			Yellow	Red
			................Normal	................Lamp replacement required
			Gray	Gray with X
			................Off	................Abnormality of the lamp
Accumulated
Lamp-use Time		Displays the accumulated lamp use time in hour units (h) and displays each
		time with Lamp1/Lamp2/Lamp3/Lamp4 order.
Accumulated
Projector-use Time		Displays the accumulated projector use time in hour unit (h).
Power Status		Displays the status of the lamp.
Projector Condition		Displays the status of the projector's power.
Input Status		Displays the selected slot.
Selection	..........................	Displays the selected input mode.
Signal Status		Displays the signal status of the selected input mode.
Internal temperature		Displays the temperature at internal thermal sensors in degrees. The icons

[A]and [B] on the page represent the thermal sensors located in the projec- tor. If the temperature at one of those sensors exceeds specified tempera- ture, the appearance of its icon changes to the following alert icon to let users know about the abnormal temperature. Please check surrounding tem- perature of the projector, check for clogged air filters and check area sur- rounding the ventilation fans.

The icons [A] and [B] represent the sensors located in the projector as follows: [A]: Surrounding temperature of the projector *

[B]: Internal temperature of the projector

*The indicated peripheral temperature of the projector is a little higher than actual surrounding temperature.

Network Board

OWNER’S MANUAL

ENGLISH

37