Telescopic runners
To prevent scratches during transport, the telescopic runners are covered with a protective coating when delivered. This coating must be removed from the runners before they are used, otherwise it can burn fast and damage the rails.
Note! Make sure that the cooker anti- tip guard is fitted, see page 8
The telescopic runners replace the ordinary oven step units that are fitted in the cooker when it is delivered. They consist of two rails that can be pulled out. The shelves, the roasting pan and the grid are laid on top of the rails. A locating pin keeps the shelf in position (see the illustration).
Use of the telescopic runners for facilitates cooking. For example, when steak or chips are to be basted, the roasting pan is easily pulled out on the rails.
Fitting the rails
First remove the oven step units that are fitted (see page 57). When fitting, the rails are first inserted in the inner hole (1) and then in the outer (2). Push into position.
MAKE SURE THAT THE LOCATING PIN IS
TURNED OUTWARDS TOWARDS THE OVEN DOOR.
The rails must be pushed in when the oven door is closed.
15
