Electrolux EKC60752 user manual Cleaning the oven, Removing the baking plate rails

Cleaning the oven

In order to facilitate cleaning, the step units or baking plate rails should be removed, see page 57.

Removing the baking plate rails

The baking plate rails are removed in the same way as the step unit, see page 57.

THE CATALYSIS ENAMEL on the oven walls and top is porous and has a certain self-cleaning effect. The oven bottom, on the other hand is made of a SMOOTH and rather harder ENAMEL from which you can scrape off spilled material with a spatula or something similar.

CATALYSIS ENAMEL

The oven gets hot during use. Keep an eye on children.

Dirt on the enamel is partly burnt off when the oven is used. If there are flecks on the enamel, burn off the oven at the highest temperature with top/bottom heating for 30–60 minutes. Remove stubborn flecks, for example fat, like this:

1“Drench” the catalysis enamel with soft soap and hot water. Use a nylon brush on the flecks. Leave it alone for one hour.

2Then turn on top and bottom heating and the highest temperature.

3Switch off the oven after three hours. Never use oven cleaning compound or sharp objects on the catalysis enamel.

53