Switching off a cooking zone
To switch off the heat retention setting, press at the same time 
and 
or zero the area with 
.
Using the hob with activated locking function
(To engage the function lock, see the chapter Safety, page 10). Even if the function lock is activated, the
hob can be used, but the next time that the hob is switched on, the function lock is again activated.
1. Switch on the cooking zones.
If the function lock is activated, this is
shown: 
.
2. Press at the same time on two optional | ~ 2 sec. |
areas for the heating positions and for
about 1 second 
and 
. A signal sounds as confirmation.
The cooking zones and settings can be set as usual until the hob is switched off again.
Disengaging the function lock
1. Switch on the cooking zones
If the function lock is activated, this is shown 
.
~ 2 sec.
2. Press the area “Function lock” for
about 3 seconds. 
A signal sounds as confirmation.
~ 3 sec.
3. Press an optional heating setting 
.
27
